Performance

See also:

Operating the air conditioning system
Heating (Heater/Manual air conditioning) Set the mode selection dial to the position and set the air selection switch (A) to the outside position. Turn the temperature control dial clockwise or ...

Setting the system
Follow the procedure below to set the system to the system armed mode. 1. Turn the ignition switch to the “LOCK” position. If you started the engine with the key, remove the key from the ignitio ...

Side turn-signal lamps
Insert a straight blade (or minus) screwdriver at the edge of the lens, remove the socket assembly and bulb together by turning it anticlockwise, and then remove the bulb by pulling out. NOTE ...