Head restraintsHead restraints  - Seat and seat belts - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

► Driving without the head restraints in place can cause you and your passengers Warning

► Driving without the head restraints in place can cause you and your passengers serious injury or death in an accident. To reduce the risk of injury in an accident, always make sure the head restraints are installed and properly positioned when the seat is occupied.
► Never place a cushion or similar device on the seatback. This can adversely affect head restraint performance by increasing the distance between your head and the restraint.

See also:

Steering wheel height adjustment
To adjust the steering wheel height, release the tilt lock lever while holding the steering wheel by hand, and raise or lower the steering wheel to the desired height. After adjustment, securel ...

Front fog lamps (Type 2)
1. Remove the screw (A). 2. Pull the cover out in the direction of the arrow shown in the illustration. 3. Remove the screws (B) and pull the entire lamp unit out. Note ► When unfaste ...

To change a tyre
1. If a wheel cover is installed, first remove the cover. (Refer to “Wheel covers”.) Then loosen the wheel nuts a quarter turn with the wheel nut wrench. Do not remove the wheel nuts yet. 2 ...