Using the inside lock knob on the driver’s doorUsing the inside lock knob on the driver’s door  - Type 2 (Except for vehicles equipped with the central door lock switch) - Central door locks - Locking and unlocking - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

Using the inside lock knob on the driver’s door locks or unlocks all doors and rear hatch.

1- Lock

1- Lock
2- Unlock

    See also:

    Reversing sensor system detection areas
    Depending on whether the vehicle is equipped with a towing bar, you can change the reversing sensor system between the standard mode and the towing bar mode. The towing bar mode changes the system ...

    If your vehicle tows another vehicle
    1. Take out the towing hook, wheel nut wrench and jack bar. Refer to “Tools and jack”. 2. Cover the tip of the jack bar with a cloth, then use it to remove the cover (D) that is located on th ...

    Fuel filter indicator display
    When the ignition switch is “ON”, if more than specified limit water has accumulated in the fuel filter, a warning display is displayed on the information screen in the multi-information dis ...