Locking and unlockingLocking and unlocking  - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

See also:

Setting the system
1. Turn the ignition switch to the “LOCK” position. Also, if a key was used to start the engine, remove the key from the ignition switch. 2. Get out of the vehicle. Close all doors and rear ha ...

Normal conditions
The starting procedure is as follows : 1. Insert the ignition key and fasten the seat belt. 2. Apply the parking brake. 3. Depress and hold the brake pedal. 4. Place the gearshift lever (manual tra ...

Vehicle identification number
The vehicle identification number is stamped as shown in the illustration. ...