Mitsubishi Outlander

See also:

Setting the system
1. Turn the ignition switch to the “LOCK” position. Also, if a key was used to start the engine, remove the key from the ignition switch. 2. Get out of the vehicle. Close all doors and rear ha ...

Power steering fluid
Check the fluid level in the reservoir while the engine is idling. Unscrew the reservoir cap; the level in this tank should be kept between the “MAX” and “MIN” lines. Use “ATF DEXRON I ...

Passenger compartment fuse location table
Note ► Spare fuses are provided on the lid of the fuse block in the engine compartment. Always use a fuse of the same capacity for replacement. : Fusible link ► Some fuses ma ...