Charge warning lampCharge warning lamp  - Warning lamps - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

This lamp illuminates when the ignition switch is turned to the “ON” position,

This lamp illuminates when the ignition switch is turned to the “ON” position, and goes off after the engine has started.

A warning is also displayed on the multiinformation display.

► If it illuminates while the engine is running, there is a problem in the Caution

► If it illuminates while the engine is running, there is a problem in the charging system. Immediately park your vehicle in a safe place and we recommend you to have it checked.

    See also:

    To operate
    1. Stop the vehicle completely using the brake pedal. 2. Release the brake pedal and the hill start assist will maintain the braking force applied while stopping for approximately 2 seconds. 3. De ...

    Setting the system
    Follow the procedure below to set the system to the system armed mode. 1. Except for vehicles equipped with the keyless operation system, remove the key from the ignition switch. For vehicles equip ...

    To store the flat tyre or spare wheel
    1. Lift up the board. 2. To store the flat tyre or spare wheel, fit the installation clamp (A) by turning it clockwise. Note ► On vehicles equipped with a compact spare wheel, the clamp ...