If the vehicle breaks down
If the vehicle breaks down on the road, move it to the shoulder and turn on the hazard warning flashers and set up a warning triangle, flashing lamp, etc.
Refer to “Hazard warning flasher switch”.
If the engine stops/fails
Vehicle operation and control are affected if the engine stops. Before moving the vehicle to a safe area, be aware of the following: ► The brake booster becomes inoperative and the pedal effort will increase. Press down the brake pedal harder than usual.
► Since the power steering system is no longer operative, the steering wheel feels heavy when turning it.
See also:
Adjustable seat belt anchor (front seats)
The seat belt anchor height can be adjusted. Move the seat belt anchor up or
down with the lock knob (A) depressed.
CAUTION
When adjusting the seat belt anchor, set it at a position that is suff ...
Headlamp levelling switch (except for vehicles with discharge headlamps)
The angle of the headlamp beam varies depending on the load carried by the vehicle.
The headlamp levelling switch can be used to adjust the headlamp illumination
distance (when the lower beam is il ...
Setting the system
Follow the procedure below to set the system to the system armed mode.
1. Except for vehicles equipped with the keyless operation system, remove the
key from the ignition switch. For vehicles equip ...