Aluminium wheels
1. Remove dirt using a sponge while sprinkling water on the wheel.
2. Use neutral detergent on any dirt that cannot be removed easily with water.
Rinse off the neutral detergent after washing the wheel.
3. Dry the wheel thoroughly using a chamois leather or a soft cloth.
Caution
► Do not use a brush or other hard implement on the wheels.
Doing so could scratch the wheels.
► Do not use any cleaner that contains an abrasive substance or is acidic or alkaline.
Doing so could cause the coating on the wheels to peel or become discoloured or
stained.
► Do not directly apply hot water using a steam cleaner or by any other means.
► Contact with seawater and road deicer can cause corrosion. Rinse off such substances
as soon as possible.
See also:
Headlamps (high-beam, except for vehicles with high intensity discharge headlamps)
1. When replacing the bulb on the right side of the vehicle, remove the bolt
(A) holding down the washer tank spout and move the spout towards the rear of the
vehicle.
: Front of the vehicle
2 ...
Safety
A 2013 base Lancer with front-wheel drive scores an overall four out of five
stars in National Highway Traffic Safety Administration crash tests. The Lancer
receives the Insurance Institute for Hi ...
Operating the heater system
Heating
Set the mode selection dial to the
position and set the air selection
switch (A) to the outside position.
Turn the temperature control dial clockwise or anticlockwise to the desired temp ...
