General information
See also:
Front room & map lamps
When replacing the bulb, put the front room & map lamps switch into the “OFF”
position.
1. Insert a straight blade (or minus) screwdriver with a cloth over its tip into
the notch of the l ...
High–mounted stop lamp
Hatchback
Place the groove of clip top as shown, then remove the cover.
Undo bolts (A), remove the lamp body, and disconnect the connector.
Undo screws (B) and take the bulb out of its socket ...
Wheel condition
1- Location of the tread wear indicator
2- Tread wear indicator
Check the tyres for cuts, cracks and other damage.
Replace the tyres if there are deep cuts or cracks.
Also check each tyre for pi ...