To adjust seat height (driver’s seat only)To adjust seat height (driver’s seat only)  - Front seat - Seat and seat belts - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

Manual type

To adjust the seat height, operate the lever repeatedly to adjust.

1- Raise

1- Raise
2- Lower

Power type

To adjust the seat height, operate the switch as indicated by arrows.

• To prevent the battery from discharging, use the power seat while the engine NOTE

• To prevent the battery from discharging, use the power seat while the engine is on.

1- To move the front of the seat up and down

1- To move the front of the seat up and down

2- To move the rear of the seat up and down

2- To move the rear of the seat up and down

3- To move the whole seat up and down

3- To move the whole seat up and down

    See also:

    Seat belt inspection
    • Check the belts for cuts, worn or frayed webbing and for cracked or deformed metallic parts. Replace the belt assembly if it is defective. • A dirty belt should be cleaned with neutral deterg ...

    To reduce the set speed
    There are 2 ways to reduce the set speed. Auto–speed control lever Pull down and hold the auto–speed control lever until you reach the lower speed you want. Release the lever when the desire ...

    If the keyless operation key is not operating properly
    Insert the keyless operation key into the key slot in the glove box. Starting the engine and changing the operation mode should now be possible. Remove the keyless operation key from the key slot a ...