Seat and seat belts
See also:
Starting the engine (petrol-powered vehicles)
The starting procedure is as follows: 1. Fasten the seat belt.
2. Make sure the parking brake is applied.
3. Depress and hold the brake pedal.
4. Fully depress the clutch pedal. (M/T)
Note
υ ...
Daytime dipper button (meter illumination control)
Each time you press this button, there is a sound and the brightness of the instruments
changes.
NOTE
• You can adjust to 8 different levels for when the position lamps are illuminated
and 8 ...
Front room & map lamps
When replacing the bulb, put the front room & map lamps switch into the “OFF”
position.
1. Insert a straight blade (or minus) screwdriver with a cloth over its tip into
the notch of the l ...