Service reminder
This displays the distance and number of months until the next periodic inspection.
Refer to “Service reminder”.
See also:
Changing a fuse
1. Before replacing a fuse, always turn off the electrical circuit concerned
and turn the ignition key to the “LOCK” position. 2. Remove the fuse box cover.
3. Referring to the fuse load cap ...
Changing the security alarm settings
It is possible to set the security alarm to the “active” mode or “inactive” mode.
Follow the procedure below.
1. Turn the ignition switch to the “LOCK” position.
If you started the engi ...
Electric remote–controlled outside rear–view mirrors*
The outside rear–view mirrors can be operated when the ignition switch is in
the “ON” or “ACC” position.
Place the lever (A) to the same side as the mirror whose adjustment is desired.
...