Outside temperature display screen

This shows the temperature outside the vehicle.
NOTE
• The display setting can be changed to the preferred units (°C or °F).
Refer to “Changing the function settings (when the ignition switch or the operation mode is ON)”.
• Depending on factors such as the driving conditions, the displayed temperature may vary from the actual outside temperature.
See also:
Starting the engine (Diesel-powered vehicles)
1. Insert the ignition key and fasten the seat belt. 2. Apply the parking brake.
3. Depress and hold the brake pedal. 4. Place the gearshift lever in the “N” (Neutral)
position. 5. Fully dep ...
Tips for starting
(1) Do not operate the starter motor continuously for anything longer than 10
seconds; doing so could run down the battery. If the engine does not start, turn
the ignition switch back to “LOCK ...
Going & Stopping
The Lancer Sportback's 168-horsepower, 2.4-liter four-cylinder engine offers
energetic acceleration that should satisfy all but the most power-hungry
drivers. For them, Mitsubishi offers a Ralliar ...
