Steering wheel lock
[For vehicles equipped with keyless operation system]
For information on operations for vehicles equipped with the keyless operation system, refer to “Keyless operation system: Steering wheel lock”.
[Except for vehicles equipped with keyless operation system]
To lock
Remove the key at the “LOCK” position.
Turn the steering wheel until it is locked.
To unlock
Turn the key to the “ACC” position while moving the steering wheel slightly right and left.
CAUTION
• Remove the key when leaving the vehicle.
In some countries, it is prohibited to leave the key in the vehicle when parked.
See also:
Inspection and maintenance following rough road operation
After operating the vehicle in rough road conditions, be sure to perform the
following inspection and maintenance procedures:
• Check that the vehicle has not been damaged by rocks, gravel, etc.
...
Service reminder
Displays the approximate time until the next periodic inspection recommended
by MITSUBISHI MOTORS. “---” is displayed when the inspection time has arrived.
NOTE
• Depending on the vehicle s ...
Lamp monitor buzzer
[When the engine was started using the key] If the driver’s door is opened when
the key is in the “LOCK” or “ACC” position or removed from the ignition switch while
the lamps are on, a b ...