Starting and driving
See also:
To remove the spare wheel
1. Lift up the luggage floor board.
2. To remove the spare wheel, remove the installation clamp (A) by turning it
anticlockwise.
NOTE
• Put the spare wheel under the vehicle body near the ja ...
Jacking up the vehicle
1. Park the vehicle on a level and stable ground. 2. Activate the hazard flashers
and turn the ignition key to the “LOCK” position. 3. Set the parking brake firmly,
move the gearshift lever (m ...
Indication lamp
1. When the ignition switch is turned “ON”, the TCL indication lamp illuminates
and goes out after a few seconds. 2. When SLIP control is exerted while driving,
the TCL indication lamp will il ...
