Height adjustment
Adjust the head restraint height so that the centre of the restraint is as close as possible to eye level to reduce the chances of injury in the event of collision. Any person too tall for the restraint to reach their seated eye level, should adjust the restraint as high as possible.
To raise the head restraint, move it upward. To lower the restraint, move it downward while pushing the height adjusting knob (A) in the direction of the arrow. After adjustment, push the head restraint downward and make sure that it is locked.
See also:
Possible driving speed (Except for vehicles with Sports mode)
In order to avoid damaging the engine due to excessively high rpm, do not exceed
the possible driving speed when the selector lever is set to the “3” (THIRD) position,
the “2” (SECOND) pos ...
Except for vehicles equipped with rain sensor
The windscreen wiper and washer can be operated with the ignition switch in the
“ON” or “ACC” position.
If the blades are frozen to the windscreen, do not operate the wipers until the
ice ...
Damaged paint
Small cracks and scratches in the paint coat should be touched up as soon as
possible with MITSUBISHI touch-up paint to prevent corrosion.
Check body areas facing the road or the tyres carefully fo ...