Display modeDisplay mode - Digital clock - Instruments and controls - Mitsubishi Carisma Owner's Manual - Mitsubishi Carisma

For vehicles with a MITSUBISHI genuine audio, average fuel consumption, driving range and average speed can be displayed besides average fuel consumption by pushing the “DISP” button in the audio system. When the ignition switch is turned “ON”, the display shows the 3 items sequentially (average fuel consumption, driving range, average speed) and returns to the original display that is shown before the ignition switch was last turned “OFF”.

NOTE

If the DISP button is pressed while the display is scrolling through the sequence mentioned above, the display stops scrolling and shows the item that was shown before the ignition switch was last turned to the “OFF” position.

    See also:

    To change a tyre
    1. On vehicles equipped with wheel covers, first remove the covers (refer to “Wheel covers”). Then loosen the wheel nuts a quarter turn with the wheel nut wrench. Do not remove the wheel nuts ...

    Brake fluid
    Check the brake fluid level in the reservoir. The brake fluid level must be between the “MAX” and “MIN” marks on the reservoir. The fluid level falls slightly with wear of the brake pads ...

    How to repeat the same track
    You can repeatedly listen to the same track by pressing the RPT button (10). Press the RPT button, and the RPT indicator (15) will come on. To release, press the button again. How to use the SCAN b ...