How to adjust the toneHow to adjust the tone - UKW/MW/LW electronic tuning radio with tape player* - For pleasant driving - Mitsubishi Carisma Owner's Manual - Mitsubishi Carisma

Press the AUDIO button (5) to select BASS - TREBLE - FADER - BALANCE Audio adjust mode off.

BASS (Bass tone control) Press the audio adjust button (4) either to select the desired bass tone quality. or TREBLE (Treble tone control) Press the audio adjust button (4) either to select the desired bass tone quality.

TREBLE (Treble tone control) Press the audio adjust button (4) either to select the desired treble tone quality. or FADER (Front/rear balance control) Press the audio adjust button (4) either to select the desired treble tone quality.

FADER (Front/rear balance control) Press the audio adjust button (4) either to balance the volume of sound from or the front and the rear speakers. to balance the volume of sound from the front and the rear speakers.

BALANCE (Left/right balance control) Press the audio adjust button (4) either to balance the volume of sound from or the left and the right speakers. to balance the volume of sound from the left and the right speakers.

NOTE

Audio adjust mode will be canceled when radio or CD operation is performed or no adjustment is performed for more than 7 seconds.

    See also:

    Changing the language cooperative control
    The language used in MITSUBISHI Multi-Communication System (MMCS) (if so equipped) or the Bluetooth® 2.0 interface (if so equipped) can be changed automatically to the same language as that shown ...

    To fasten
    1. Pull the seat belt out slowly while holding the latch plate. Note ► When the seat belts cannot be pulled out in a locked condition, pull the belts once forcefully and then return them. A ...

    Dipper (High/Low beam change)
    When the lamp switch is in the position, the beam changes from high to low (or low to high) each time the lever is pulled fully (1). While the highbeam is on, the high-beam indication lamp in t ...