Mitsubishi Lancer

See also:

Warning lamps
Brake warning lamp This lamp illuminates when the ignition switch is turned to the “ON” position or the operation mode is put in ON, and goes off after a few seconds. Always make sure that t ...

Licence plate lamps
1. Remove while pressing the lamp unit (A) to the left side. 2. Insert a minus screwdriver with the end covered with a cloth or other object to press the hook (B) aside and remove the lens. 3. ...

Setting the system
1. Turn the ignition switch to the “LOCK” position. Also, if a key was used to start the engine, remove the key from the ignition switch. 2. Get out of the vehicle. Close all doors and rear ha ...