To stop the air conditioning
By setting the blower speed selection dial to the “
”
(OFF) position.
All operations will stop except the change of air selection.
See also:
Interior lamps
1- Cargo room lamp
2- Rear room lamp
3- Front room & map lamps
Note
► If you leave the interior lamps on without running the engine, you will run
down the battery.
Before you leave ...
Selector lever operation
The CVT selects an optimum gear ratio automatically, depending on the speed of
the vehicle and the position of the accelerator pedal.
The selector lever (A) has 2 gates; the main gate (B) and the m ...
Reference lines on the screen
Reference lines and upper surface of the rear bumper (A) are displayed on the
screen.
► Red line (B) indicates approximately 50 cm behind the rear bumper.
► Two Green lines (C) indicat ...