Floor console box
Type 1
Upper and lower boxes are located inside the floor console box.
The floor console box can also be used as an armrest.
1- Upper box
2- Lower box
To open the upper box, lift the right release lever (A) and raise the lid.
To open the lower box, lift the left release lever (B) and raise the lid.
Type 2
To open the console box, lift the release lever (C) and raise the lid.
Tissue holder
The tissue holder (A) is located on the back of the floor console box lid.
Pen holder
The pen holder (A) is located on the back of the floor console box lid.
See also:
Procedure for replacing the remote control switch battery
1. Remove the screw (A) from the remote control switch.
2. With the MITSUBISHI mark facing you, insert the cloth covered tip of a straight
blade (or minus) screwdriver into the notch in the remot ...
To unlock the doors and rear hatch
You can select the function to unlock the doors and rear hatch either using the
ignition switch position or using the selector lever position (CVT) or the gearshift
lever position (Twin Clutch SST ...
Headlamp levelling switch
The angle of the headlamp beam varies depending upon the load carried by the
vehicle.
The headlamp levelling switch can be used to adjust the headlamp illumination
distance (when the lower beam ...