Mitsubishi Lancer

See also:

Selector lever operation
The CVT selects an optimum gear ratio automatically, depending on the speed of the vehicle and the position of the accelerator pedal. The selector lever (A) has 2 gates; the main gate (B) and the m ...

Water temperature gauge
The water temperature gauge indicates the engine coolant temperature when the ignition switch is “ON”. CAUTION If the indication needle enters the overheating zone while the engine is runn ...

Side turn-signal lamps
Insert a straight blade (or minus) screwdriver at the edge of the lens, remove the socket assembly and bulb together by turning it anticlockwise, and then remove the bulb by pulling out. NOTE ...