Front turn–signal lamps
Petrol–powered vehicles, Diesel–powered vehicles (right side)
Turn the bulb socket anticlockwise to remove. And remove the bulb from the socket by turning anticlockwise while pressing it inward.
Diesel–powered vehicles (left side)
1. Remove the cover.
2. Turn the bulb socket anticlockwise to remove it. And remove the bulb from the socket by turning anticlockwise while pressing it inward.
See also:
Front room & map lamps
When replacing the bulb, put the front room & map lamps switch into the “OFF”
position.
1. Insert a straight blade (or minus) screwdriver with a cloth over its tip into
the notch of the l ...
Deployment of front air bags
The front air bags ARE DESIGNED TO DEPLOY when...
The front air bags are designed to deploy when the vehicle suffers a moderate
to severe frontal impact. Typical conditions are shown in the illus ...
Engine coolant
A translucent coolant reserve tank is located in the engine compartment. The
coolant level in this tank should be kept between the two marks on the reserve tank
when measured while the engine is ...