Manual typeManual type  - To recline the seatback - Front seat - Seat and seat belts - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

In order to recline the seatback, lean forward slightly, pull the seatback lock lever up, and then lean backward to the desired position and release the lever.

The seatback will lock in that position.

Caution

► The reclining mechanism of the seatback is spring loaded, causing it to Caution

► The reclining mechanism of the seatback is spring loaded, causing it to return to the vertical position when the lock lever is operated. When using the lever, sit close to the seatback or hold it with your hand to control its return motion.

    See also:

    Cruise control switches
    A- “ON OFF” switch Used to turn on and off the cruise control. B- “COAST SET” switch Used to reduce the set speed and to set the desired speed. C- “ACC RES” switch Used to increase ...

    Key lock-in prevention system
    When the ignition switch is in the “LOCK” (PUSH OFF) position, if you close all the doors and the rear hatch with the keyless operation key left in the vehicle and you try to lock the doors ...

    Sedan
    Place the grove of clip top as shown, then remove the cover. Remove the bulb from the socket by turning it anticlockwise while pressing it inward. ...