Manual typeManual type - To adjust seat height (driver’s side only) - Front seat - Seat and seat belts - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

Operate the lever repeatedly to raise or lower the seat.

1- Raise

1- Raise
2- Lower

    See also:

    Leg area heating
    Set the mode selection dial to the position shown in the illustration and set the air selection switch (A) to the outside position. Adjust the temperature by turning the temperature control dial ...

    A/T mode changeover switch (Except for vehicles with Sports mode)
    Two drive modes, “AUTO” and “HOLD”, can be selected. Each time you press the switch, the “AUTO” and “HOLD” modes will switch alternately. When the “HOLD” mode is selected, the ...

    Brake fluid
    Check the brake fluid level in the reservoir. The brake fluid level must be between the “MAX” and “MIN” marks on the reservoir. The fluid level falls slightly with wear of the brake pads ...