To unfastenTo unfasten  - 3-point type seat belt (with emergency locking mechanism) - Seat belts - Seat and seat belts - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

Hold the latch plate and push the button on the buckle.

Note

► As the belt retracts automatically, keep holding the latch plate while retracting Note

► As the belt retracts automatically, keep holding the latch plate while retracting so that the belt stows slowly. Failure to do this could damage the vehicle.

    See also:

    Setting the system
    Follow the procedure below to set the system to the system armed mode. 1. Turn the ignition switch to the “LOCK” position. If you started the engine with the key, remove the key from the ignitio ...

    Head restraints
    Warning ► Driving without the head restraints in place can cause you and your passengers serious injury or death in an accident. To reduce the risk of injury in an accident, always make su ...

    To remove the spare wheel
    1. Lift up the luggage floor board. 2. To remove the spare wheel, remove the installation clamp (A) by turning it anticlockwise. NOTE • Put the spare wheel under the vehicle body near the ja ...