Outside temperature display screenOutside temperature display screen  - Multi-information display - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

This shows the temperature outside the vehicle.

This shows the temperature outside the vehicle.

► The display setting can be changed to the preferred units (°C or °F). Note

► The display setting can be changed to the preferred units (°C or °F).
Refer to “Changing the function settings (when the ignition switch is “ON”)”.
► Depending on factors such as the driving conditions, the displayed temperature may vary from the actual outside temperature.

    See also:

    Removal of water from the fuel filter (diesel-powered vehicles only)
    When water has accumulated in the fuel filter, remove the water as described below. 1. Place a drainage tray under the filter. 2. Connect a hose to the drain plug (A) and let it hang down into ...

    Parking
    To park the vehicle, fully engage the parking brake, and then move the gearshift lever to 1st or “R” (Reverse) position for vehicles equipped with M/T, or set the selector lever to “P” (PA ...

    Introduction of outside air
    To introduce air into the vehicle during hot weather, set the air selection switch (A) to the outside position and set the temperature control dial to the position shown in the illustration. Be ...