Multi-information displayMulti-information display - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

See also:

Setting the system
1. Turn the ignition switch to the “LOCK” position. Also, if a key was used to start the engine, remove the key from the ignition switch. 2. Get out of the vehicle. Close all doors and rear ha ...

Manual air conditioning
The air conditioning can only be used while the engine is running. ...

Dipper (High/Low beam change)
When the lamp switch is in the position, the beam changes from high to low (or low to high) each time the lever is pulled fully (1). While the highbeam is on, the high-beam indication lamp in t ...