Twin Clutch SST control mode display screen (vehicles equipped with Twin Clutch SST)Twin Clutch SST control mode display screen (vehicles equipped with Twin Clutch 
SST)  - Multi-information display - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

The operation status of the Twin Clutch SST control mode is displayed.

The operation status of the Twin Clutch SST control mode is displayed.

Refer to “Twin Clutch SST control mode”.

    See also:

    Setting the system
    Follow the procedure below to set the system to the system armed mode. 1. Turn the ignition switch to the “LOCK” position. If you started the engine with the key, remove the key from the ignitio ...

    Driver’s and front passenger’s airbag system
    The driver’s airbag is located under the padded cover in the middle of the steering wheel. The front passenger’s airbag is contained in the instrument panel above the glove box. The driver’ ...

    Window glass
    The window glass can normally be cleaned using only a sponge and water. Glass cleaner can be used to remove oil, grease, dead insects, etc. After washing the glass, wipe dry with a clean, dry, soft ...