Function setting screen
The “Display language”, “Temperature unit”, “Fuel consumption unit”, and “Average fuel consumption and speed reset method” etc. settings can be modified as desired.
Refer to “Changing the function settings (when the ignition switch is “ON”)” for further details.
See also:
Procedure for replacing the remote control switch battery
1. Remove the screw (A) from the remote control switch.
2. With the MITSUBISHI mark facing you, insert the cloth covered tip of a straight
blade (or minus) screwdriver into the notch in the remot ...
Key lock-in prevention system
When the ignition switch is in the “LOCK” (PUSH OFF) position, if you close all
the doors and the rear hatch with the keyless operation key left in the vehicle
and you try to lock the doors ...
Flooded engine
If the engine has become flooded during starting, first operate the starter for
5 to 6 seconds while fully depressing the accelerator pedal, then start the engine
without depressing the accelerato ...