Running-in recommendationsRunning-in recommendations  - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

During the running-in period for the first 1,000 km (620 miles), it is advisable to drive your new vehicle using the following precautions as a guideline to aid long life as well as future economy and performance.

► Do not race the engine at high speeds.
► Avoid rapid starting, accelerating, braking and prolonged high-speed running.
► Keep to the running-in speed limit shown below.
Please note that the legal speed limits must be adhered to.
► Do not exceed loading limits.
► Refrain from towing a trailer.

See also:

To listen to a CD
1- PWR (On-off switch) 2- U/M/L button 3- CD (CD mode changeover) button 4- Disc loading slot 5- CD eject button 6- DISC (Disc selection) button* 7- (Track down) button 8- (Track up) button 9- S ...

To change a tyre
1. If a wheel cover is installed, first remove the cover. (Refer to “Wheel covers”.) Then loosen the wheel nuts a quarter turn with the wheel nut wrench. Do not remove the wheel nuts yet. 2 ...

Limited-slip differential (LSD)
A limited-slip differential (LSD) is applied for the rear wheel differential. The features of this LSD are described below: Just as with a conventional differential, the wheel on one side is allow ...