Outside rear-view mirrorsOutside rear-view mirrors - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

See also:

TP (Traffic information Program) search function
The traffic information program standby function is turned on (with the TP indicator (11) shown on the display) and after about 45 seconds since the RDS indicator (9) turns off due to weak signal ...

Front room & map lamps
When replacing the bulb, put the front room & map lamps switch into the “OFF” position. 1. Insert a straight blade (or minus) screwdriver with a cloth over its tip into the notch of the l ...

Starting the engine (petrol-powered vehicles)
The starting procedure is as follows: 1. Fasten the seat belt. 2. Make sure the parking brake is applied. 3. Depress and hold the brake pedal. 4. Fully depress the clutch pedal. (M/T) Note υ ...