If the warning display appears while drivingIf the warning display appears while driving  - Electric power steering system (EPS) - Power steering system - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

1. Stop the vehicle in a safe place and turn off the engine.
2. Wait approximately 30 seconds and then restart the engine to check whether the warning display goes out; if it then remains off, there is no problem.

If the warning display does not go out, or it appears again while driving, we recommend you to have your vehicle inspected.

    See also:

    To increase the set speed
    There are 2 ways to increase the set speed. Auto–speed control le Pull up the auto–speed control lever. And hold it until you reach the higer speed you want. Release the lever when the desir ...

    AWC control fluid
    To check the fluid level The AWC control fluid reservoir is in the luggage compartment. Note ► Check the fluid level in the reservoir 90 minutes or more after turning the ignition switch t ...

    To lock
    Press the LOCK switch (1). All the doors and rear hatch will be locked. The turn-signal lamps will blink once. Note ► With a vehicle that has a Dead Lock System, pressing the LOCK switch (1 ...