Operation under adverse driving conditions
See also:
Antenna
To remove
Turn the pole (A) anticlockwise.
To install
Screw the pole (A) clockwise into the base (B) until it is securely retained
NOTE
• Be sure to remove the roof antenna in the following ...
Roof drip moulding
When installing the roof carrier, remove the roof drip moulding caps.
1. Open the cover (A) and remove the screws using a Philips screwdriver. 2.
Remove the caps by sliding them.
After removal o ...
Fuel filter indicator display
When the ignition switch is “ON”, if more than specified limit water has accumulated
in the fuel filter, a warning display is displayed on the information screen in
the multi-information dis ...
