Plastic, vinyl leather, fabric and flocked partsPlastic, vinyl leather, fabric and flocked parts  - Cleaning the interior of your vehicle - Vehicle care - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

1. Gently wipe off with gauze or other soft cloth soaked with a 3 % aqueous solution of neutral detergent.
2. Dip cloth in fresh water and wring out well.

Using this cloth, wipe off the detergent thoroughly.

► Do not use cleaners, conditioners, and protectants containing silicons or wax. Note

► Do not use cleaners, conditioners, and protectants containing silicons or wax.
Such products, when applied to the instrument panels or other parts, may cause reflections on the windscreen and obscure vision.
Also, if such products get on the switches of the electrical accessories, it may lead to failure of these accessories.

    See also:

    To install
    1. Make sure the tabs (A) of the back of the wheel cover are not broken and correctly fitted on the rings (B). If in doubt, do not install the wheel cover and consult your MITSUBISHI MOTORS Author ...

    Changing the mode selection
    To change the position and amount of air flowing from the ventilators, turn the mode selection dial. (Refer to “Mode selection dial”.) These symbols are used in the next several illustrations ...

    Control panel
    A- Temperature control dial B- Air selection switch C- Blower speed selection dial D- Air conditioning switch E- Mode selection dial F- Rear window demister switch NOTE • On vehicles with ...