Fluid type
Use brake fluid conforming to DOT3 or DOT4 from a sealed container. The brake fluid is hygroscopic.
Too much moisture in the brake fluid will adversely affect the brake system and clutch system, reducing the performance.
Caution
► Take care in handling brake fluid as it is harmful to the eyes, may irritate
your skin and also damage painted surfaces.
► Use only the specified brake fluid.
Do not mix or add different brands of brake fluid to prevent chemical reactions.
Do not let any petroleum-based fluid touch, mix with, or get into the brake fluid.
This will damage the seals.
► Keep the reservoir tank cap closed to prevent the brake fluid from deteriorating
except maintenance.
► Clean the filler cap before removing and close the cap securely after maintenance.
See also:
Key lock-in prevention system
When the ignition switch is in the “LOCK” (PUSH OFF) position, if you close all
the doors and the rear hatch with the keyless operation key left in the vehicle
and you try to lock the doors ...
Error codes (iPod)
Vehicles with Link System
If an error code (1) appears in the display, take action in accordance with the
table below.
...
Electronic immobilizer (Anti-theft starting system)
The electronic immobilizer has been designed to significantly reduce the possibility
of vehicle theft.
The purpose of the system is to immobilize the vehicle if an invalid start is
attempted. A v ...
