Front passenger seat belt warning lampFront passenger seat belt warning lamp  - Seat belts - Seat and seat belts - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

The front passenger seat belt warning lamp is located on the instrument panel.

The lamp comes on when a person sits on the front passenger seat but does not

The lamp comes on when a person sits on the front passenger seat but does not fasten the seat belt. It goes off when the seat belt is subsequently fastened.

• Do not install any accessory or sticker that makes the lamp difficult to WARNING

• Do not install any accessory or sticker that makes the lamp difficult to see.

    See also:

    Flooded engine
    If the engine has become flooded during starting, first operate the starter for 5 to 6 seconds while fully depressing the accelerator pedal, then start the engine without depressing the accelerato ...

    Reversing sensor system warning display
    In case there is a malfunction in the reversing sensor system, the display for the malfunctioning sensor will blink and the warning buzzer will sound for approximately 5 seconds. Even after the bu ...

    System preparation mode (approx. 20 seconds)
    (The buzzer sounds intermittently and the security indicator (A) blinks.) The system preparation time extends from the point at which all of the doors and rear hatch are locked by pressing the LO ...