Engine coolant temperature displayEngine coolant temperature display - Multi-information display - Instruments and controls - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

This indicates the engine coolant temperature.

This indicates the engine coolant temperature.

If the coolant becomes hot, blink. will blink.

Pay careful attention to the engine coolant temperature display while you are driving.

• If the engine is overheating, CAUTION

• If the engine is overheating, graph is on the red zone. will blink. In this case, the bar graph is on the red zone.

lmmediately park the vehicle in a safe place and take the required measures. Refer to “Engine overheating”.

    See also:

    Caution for installing the child restraint on vehicles with a front passenger airbag
    The label shown here is attached on vehicles with a front passenger airbag. WARNING • Extreme Hazard! Do not use a rearward facing child restraint on a seat protected by an airbag in front of ...

    Changing the temperature unit
    The display unit for temperature can be switched. 1. Press and hold the multi-information meter switch for about 2 seconds or more to switch from the setting mode screen to the menu screen. Refer t ...

    Operation of the Dead Lock System
    With a vehicle that has a Dead Lock System, it is possible to set the Dead Lock System using the driver’s or front passenger’s door lock/unlock switch, or the rear hatch LOCK switch. (Refer to ...