Door ajar warning display screen (when the ignition switch or the operation mode is ON)Door ajar warning display screen (when the ignition switch or the operation mode is ON) - Multi-information display - Instruments and controls - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

Mitsubishi ASX / Mitsubishi ASX Owner's Manual / Instruments and controls / Multi-information display / Door ajar warning display screen (when the ignition switch or the operation mode is ON)

If any of the doors or the tailgate is not completely closed, this displays the

If any of the doors or the tailgate is not completely closed, this displays the open door or tailgate.

If the vehicle speed exceeds approximately 8 km/h (5 mph) while a door is ajar, a buzzer sounds 4 times. This notifies the driver that a door is ajar.

• Before moving your vehicle, check that the warning lamp is OFF. CAUTION

• Before moving your vehicle, check that the warning lamp is OFF.

    See also:

    Changing the temperature unit
    The display unit for temperature can be switched. 1. Press and hold the multi-information meter switch for about 2 seconds or more to switch from the setting mode screen to the menu screen. Refer t ...

    Seat belt inspection
    (1) Check the belts for cuts, worn or frayed webbing and for cracked or deformed metallic parts. Replace the belt assembly if defective. (2) A dirty belt should be cleaned with neutral detergent i ...

    Keyless operation key take-out monitoring system
    Type 1 Type 2 When the vehicle is parked with the ignition switch in any position other than “LOCK” (PUSH OFF), if you close the door after opening any of the doors and taking the keyles ...