Towing

See also:

Procedure for replacing the remote control switch battery
1. Remove the screw (A) from the remote control switch. 2. With the MITSUBISHI mark facing you, insert the cloth covered tip of a straight blade (or minus) screwdriver into the notch in the remot ...

Bleeding the fuel system (diesel-powered vehicles only)
The fuel system should be bled to remove air as described below if the fuel supply is exhausted during travel. 1. Undo the four clips on the air cleaner and push the cover (B) aside. 2. Press ...

To operate
To operate the system, move the gearshift lever or selector lever to the “R” position while the ignition switch or the operation mode is in ON. To stop the operation, push the “SONAR” swit ...