Vehicle care
See also:
Stop and tail lamps and rear turn-signal lamps
1. Insert a straight blade (or minus) screwdriver with the end covered with a
cloth or other object at the edge of the cover and pry gently to remove the cover.
2. Remove the socket and bulb asse ...
A/T mode changeover switch (Except for vehicles with Sports mode)
Two drive modes, “AUTO” and “HOLD”, can be selected.
Each time you press the switch, the “AUTO” and “HOLD” modes will switch alternately.
When the “HOLD” mode is selected, the ...
Warning lamp
The ABS warning lamp should illuminate when the ignition switch is turned ”ON”,
and should go off in a few seconds.
CAUTION
If the warning lamp stays on or does not illuminate when you start ...