Selector lever operation
Except for vehicles with Sports mode
The transmission has 4 forward gears and 1 reverse gear.
The individual gears are selected automatically, depending on the position of the gear selector lever, the speed of the vehicle and the position of the accelerator pedal.
The selector lever has 7 positions, and is equipped with a lock button (A) to avoid inadvertent selection of the wrong gear.
Button must be pushed
and brake pedal must be depressed to move the lever
Button must be pushed
to move the lever.
Button need not be pushed
to move the lever.
See also:
Door ajar prevention system
When the ignition switch is in the “LOCK” (PUSH OFF) position, if you try to
lock the doors and rear hatch by pressing the driver’s or front passenger’s door
lock/unlock switch, or the r ...
The side airbags and curtain airbags ARE NOT DESIGNED TO DEPLOY when…
The side airbags and curtain airbags are not designed to deploy in conditions
where they cannot usually provide protection to the occupant. Typical conditions
are shown in the illustration.
1- ...
Clutch fluid
Petrol-powered vehicle
To check the clutch fluid
To check the clutch fluid The clutch fluid in the master cylinder should be checked
when performing other underhood services. In addition, the syst ...