Passing accelerationPassing acceleration  - Operation of the Twin Clutch SST - Twin Clutch SST (Sport Shift Transmission) - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

To gain extra acceleration in “D” (DRIVE) position, push the accelerator to the floor. The Twin Clutch SST will automatically downshift.

► In manual shift, downshifts do not take place when the accelerator is depressed Note

► In manual shift, downshifts do not take place when the accelerator is depressed all the way to the floor.

    See also:

    Caution for installing the child restraint on vehicle with front passenger air bag
    The label shown here is attached on vehicles with front passenger air bag. If this label is attached, never install the rearfacing child restraint on the front passenger’s seat. WARNING (1 ...

    Multi centre display
    When the ignition switch is in the ”ACC” position, the outside temperature and clock are displayed in the multi centre display. When the ignition switch is in the ”ON” position, the aver ...

    Setting the system
    1. Turn the ignition switch to the “LOCK” position. Also, if a key was used to start the engine, remove the key from the ignition switch. 2. Get out of the vehicle. Close all doors and rear ha ...