Rear combination lamps
See also:
Fuse replacement
1. Before replacing a fuse, always turn off the electrical circuit concerned
and place the ignition switch in the “LOCK” position.
2. Remove the fuse puller (A) from the inside of the fuse box ...
At extreme cold ambient temperature
If the engine won’t start, depress the accelerator pedal about halfway while
cranking the engine. Once the engine starts, release the accelerator pedal.
CAUTION
When starting the engine, make su ...
To operate
To operate the system, move the gearshift lever or selector lever to the “R”
position while the ignition switch is in the “ON” position. When the reversing sensor
system is operated, the r ...