Overview

See also:

Reference lines on the screen
Reference lines and upper surface of the rear bumper (A) are displayed on the screen. ► Red line (B) indicates approximately 50 cm behind the rear bumper. ► Two Green lines (C) indicat ...

Setting the system
1. Turn the ignition switch to the “LOCK” position. Also, if a key was used to start the engine, remove the key from the ignition switch. 2. Get out of the vehicle. Close all doors and rear ha ...

Cancelling the alarm
It is possible to halt the activation of an alarm using the following methods: ► Pressing the LOCK or UNLOCK switch on the remote control switch. (After pressing the LOCK switch, the vehicle ...