To operate without using the keyless operation functionTo operate without using the keyless operation function  - Keyless operation system - Locking and unlocking - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

Emergency key

The emergency key is built into the keyless operation key. If the keyless operation function cannot be used, for example because the keyless operation key battery has worn out or the vehicle battery is flat, you can lock and unlock the driver’s door with the emergency key. To use the emergency key (A), unlock the lock knob (B) and remove it from the keyless operation key (C).

NOTE

• Only use the emergency key for emergencies. NOTE

• Only use the emergency key for emergencies.

If the keyless operation key battery wears out, replace it as quickly as possible so that you can use the keyless operation key.

• After using the emergency key, always return it into the keyless operation key.

Locking and unlocking the driver’s door

Turning the emergency key in the forward direction locks the door, and turning it in the rear direction unlocks the door. Also refer to “Locking and unlocking: Doors”.

1- Lock

1- Lock
2- Unlock

    See also:

    Blower speed selection dial
    Select the blower speed by turning the blower speed selection dial clockwise or anticlockwise. The blower speed will gradually increase as the dial is turned to the right. ...

    Ignition switch ON reminder system
    When the engine was started using the keyless operation function If the driver’s door is opened with the ignition switch in any position other than “LOCK” (PUSH OFF) after turning off the e ...

    Towing bar mounting specifications
    See the following table for fixing points (A) for the towing bar. 1: Vehicles equipped with 16 inch tyres that are without high ground suspensions 2: Vehicles equipped with 18 inchtyres 3: Vehi ...