Interior lampsInterior lamps  - For pleasant driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

1- Cargo room lamp

1- Cargo room lamp
2- Rear room lamp
3- Front room & map lamps

► If you leave the interior lamps on without running the engine, you will run Note

► If you leave the interior lamps on without running the engine, you will run down the battery.

Before you leave the vehicle, make sure that all the interior lamps are off.

See also:

Wiper blades
Use a soft cloth and glass cleaner to remove grease, dead insects, etc., from the wiper blades. Replace the wiper blades when they no longer wipe properly. (Refer to page 9–18) ...

ACD control mode switch
When the ignition switch is set to the “ON” position, operate the AWC switch to change the control mode. Each time the switch is pushed, the control mode changes in the order “TARMAC”  ...

Auto Stop & Go (AS&G) system
This paragraph summarizes the major items of the Auto Stop & Go (AS&G) system such as the characteristics, operating procedures, etc. For details, refer to “Auto Stop & Go (AS&G) ...