Locking and unlocking
See also:
Headlamp levelling switch
The angle of the headlamp beam varies depending upon the load carried by the
vehicle.
The headlamp levelling switch can be used to adjust the headlamp illumination
distance (when the lower beam ...
Front turn-signal lamps
1. Remove the clips (A) and clips (B), then remove the duct (C) and the upper
cover (D).
2. Remove the entire socket and bulb assembly (E) by turning it anticlockwise.
: Front of the vehicle ...
Front fog lamps (Type 1)
1. Remove the screw (A) and pull the cover out.
2. Remove the screws (B) and pull the entire lamp unit out.
Note
► When unfastening the screws, be careful not to mistakenly move the beam ...