Indication lamp, warning lamp, and information screen display list

See also:

Twin Clutch SST control mode
When the ignition switch is set to the “ON” position, operate the Twin Clutch SST control mode switch (A) to change the control mode. When the engine is started, the control mode is automatic ...

Cleaning the inside of your vehicle
After cleaning the inside of your vehicle with water, cleaner or similar, wipe and dry in a shady, well-ventilated area. NOTE Always read the instructions on the cleaner label. ...

Headlamps (low beam, except for vehicles with high intensity discharge headlamps)
1. For petrol-powered vehicles equipped with turbocharger, when replacing the bulb on the left side, remove the bolt (A) holding down the relay box and move the relay box towards the rear of the v ...