Auto Stop & Go (AS&G) systemAuto Stop & Go (AS&G) system  - General information - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

This paragraph summarizes the major items of the Auto Stop & Go (AS&G) system such as the characteristics, operating procedures, etc. For details, refer to “Auto Stop & Go (AS&G) system”.

The Auto Stop & Go (AS&G) system reduces the emission of exhaust gases and increases fuel efficiency.

The Auto Stop & Go (AS&G) system automatically stops and restarts the engine without the use of the ignition switch when the vehicle is stopped, such as at traffic lights or in a traffic jam.

See also:

A/T mode changeover switch (Except for vehicles with Sports mode)
Two drive modes, “AUTO” and “HOLD”, can be selected. Each time you press the switch, the “AUTO” and “HOLD” modes will switch alternately. When the “HOLD” mode is selected, the ...

Interrupt display screen (when the ignition switch is “OFF”)
When there is information to be announced, such as lamp reminders, the buzzer sounds and the multiinformation display switches to the warning display screen. Refer to the appropriate page and take ...

Jacking up the vehicle
1. Park the vehicle on a level and stable ground. 2. Activate the hazard flashers and turn the ignition key to the “LOCK” position. 3. Set the parking brake firmly, move the gearshift lever (m ...